So I bought a new mini bike. Just something to get started that was cheap and able to be used for shenanigans.
It is a Motovox Mbx10 chassis with a predator 212cc engine. It is all stock besides the engine swap. Also, the seat was reupholstered, but the stock exhaust melted the bottom...
Had a wicked pratice on Saturday with Chris, Zach and Dyllan out at Kosta's private track.
Got a couple of pics to share.
Had a few bike issues. YX LXR broke the kick starter shaft 3rd kick off day. lol :(
Other LXR had rear sprocket issues and flats all round. Glad all this happened before...
Hey guys. I currently possess a 140cc big wheel that i bought from Foxico. My problem is the way the rear brake system is set up when i press down on the rear brake pedal and it moves the brake piston it hits the swing arm causing the piston to bend (one of the many design flaws of the bike but...
My names Matt and I hope to be on this forum for many years to come
Basically got a couple of questions.
I bought one of those $200 mini moto's off eBay that have those flames. You probably know the one. I got it on an ebay auction brand new for $162.50
12.5 inch wheel
50cc 2 stroke
So my chain flew off on my lifan 125 and snapped the pulse sensor off. So I bought a new stator plate. It seemed to be exactly the same except the sensor was a tiny bit closer to the flywheel and I had to grind about half a mil off the 'nib' of flywheel so it wouldn't hit when it...
Do they use irk, ork, or a regular stator? I ask this because I was on pitbikeclub's website and I asked this question. They said that I can put a 155cc stator on 125cc engine to give my bike better throttle response.
Can you replace a stock bike with a new stator and because of that new stator it has better throttle response/acceleration? Like are there "performance" stators and flywheels? and I dont mean and ORK or IRK.
New to the forum, have a problem with my genuine thumpstar engine, i recently replaced the stock magneto with one of those performance magnetos off ebay,
but i cannot for the life of me get spark.
ive replaced the coil, spark plug, and try every possible combination of wiring here...
Bought an aftermarket stator/flywheel and all on eBay (link below). Swapped it into my lifan 110cc no problem, accept for the wiring... Has anyone done such a swap? Do I need to buy a new harness all together? Does anyone have a diagram for this stator, or know what colors match up? I've always...
hi there just realised i have the wrong stator,
what i want to do is run lights off my yx 160 but there is no 'yellow' wires only black with yellow and that goes to the coil So....i have the regulator and im wondering if i can hard wire the regulator to the coil? if not ive seen a magneto on dhz...
I recently bought the IRK kit off ebay that everyone has to try and freshin up my 70cc bike. I installed it on my chinese crf 70. The bike ran flawlessly before i put this kit on. I installed the components and ran it off my stock harness into my aftermarket rev box (didnt use the red one that...
on my last three rides of been on i have had my chain come off go through the chain guard and into the stator snapping off the magnet
first time we thought it was just because the chain was loose and came off, second time the chain tensioners where all buckled so the wheel just kept...
hi this is my first post here hope i'm in the right spot. I picked up a non running 88 ds80 for my daughter as she is out growing her 79 jr50. The previous owner said it lost spark one day and he had a friend look at it. he cut and spliced all the wires and it sat for 5 years. something seems...
Ok, basically bought an 160cc atomik for nothing, because it won't go into 3rd and 4th, pretty sure the guy didnt have much of an idea about it, basicly new he said it was a factory defect?, or did he not do something when building it up. does anyone know if there's any adjustment in the box, or...
Hey guys, My stator plate wires are different to my wires on my bike, (the colours) and i am kinda confused, can someone please tell me what goes to what? Much appreciated if you can!
This is on the bike:
This is my stator plate:
I'm trying to get a stator/lighting coil for my 155z (should be the same as z160ho) to run a rev limiter.
I have seen a few on ebay for around $30 (Brand Magneto Stator Coil 8POLES GY6 125 Moto Lighting | eBay), but I have no idea how to work out if they will fit or not? I know...
I have a 160cc LE pit bite pro,
I am upgrading the Magneto so I can run a front headlight,
But am unsure what wires to connect where, it's different wiring then my friends 125cc pit bike,
I'm unsure about the wires comming from the magneto, they are all joined into a big white...
Hey so I recently just bought a jap 90cc and when I was riding it a few days ago the stator nut that holds the magnet on the crankshaft fell off.. Well I didn't notice it fall off so I continued to ride.. When I was done I let my friend ride it aroun my block and the little like notch in the...
I got a free 50cc Honda/clone dirtbike. I guess the rotor flew apart and killed the stator and.also the cover/chain gaurd. The bike came with a new stator but o need the rotor and cover. I need help on what rotor to order and from where. Thanks for any help.