roostyamates
Well-Known Member
- Joined
- Dec 2, 2014
- Messages
- 90
- Reaction score
- 0
this thing looks wicked! awesome build mate
Help Support Mini Dirt Bikes & Pit Bikes Forum:
Adams
Well-Known Member
Cheers mate. Kind of stopped updating this thread here as it seems like no-one was really interested haha...
Here's some recent updates:
Pulled my finger out of my arse today and started fitting some bits I had laying about.
Started off by making myself a new number board bracket for the SP-5's, BBR sell them but it's long waiting for it to be shipped. Fitted the new white number board and BBR cable guide.
Then tidied up my loom a little bit as it's an absolute state I won't lie, I'll sort it properly soon.
Fitted the new DID black/gold chain and new chain roller.
New red/white iron cross valve caps(Red Baron m8)
Couple random iron cross stickers.
New head breather hose in yellow.
New fastway f3 footpegs.
iShock is fitted, new UNI air filter, and the ASV F3 front brake lever. Just waiting on my red baron brake pedal now.
Yum yum, cheers Bigs. Fast50's Billet Hub x 10" Faba Rim.
Will bang some bearings in it and mount a tyre at some point.
Last edited by a moderator:
Adams
Well-Known Member
Hahaha was hoping no-one would notice. It's them new lightweight 27 spoke 28 hole wheels bro.
Going to rob one out of my ching chong wheel to bung in it.
Going to rob one out of my ching chong wheel to bung in it.
my67xr
Miniriders Legend and Master Spanner Spinning Mode
Just watch out using a standard china spoke, they wont be as thick as those and it will be the first to break
Try these guy's- Motorcycle Spokes from Central Wheel Components Limited
Try these guy's- Motorcycle Spokes from Central Wheel Components Limited
Adams
Well-Known Member
^ Cheers dude will give that a peep.
Had some time without the missus today, brill, time to play with the bike. Was going to fit my new wheel today with the hope my China bearings from my old bike were gonna fit and my drum too, dug it all out.. Nope. So left it on the bench for now, did get round to tightening up the spokes and truing it up a little though. Had to modify a 6mm to fit the nipples hahaha.
Then whilst I had the wheel out I was like hmmm, **** it, may as well clean the swingarm out. Other side is mirror finish, got lazy on this side I won't lie, you can just about see on the top with the reflection of the chain lol. Needed to be done though, also fitted the stickers that Bigs ever so kindly sent me.
Whilst I was at it, tidied up the SP-5 fork bottoms a little bit with a rattle can, will do for the time being till I can be arsed to powdercoat them. New stickers off Bigs too.
And now she sit like dissssss
Front disc brake conversion next week and hopefully a 2015 front number board.
Had some time without the missus today, brill, time to play with the bike. Was going to fit my new wheel today with the hope my China bearings from my old bike were gonna fit and my drum too, dug it all out.. Nope. So left it on the bench for now, did get round to tightening up the spokes and truing it up a little though. Had to modify a 6mm to fit the nipples hahaha.
Then whilst I had the wheel out I was like hmmm, **** it, may as well clean the swingarm out. Other side is mirror finish, got lazy on this side I won't lie, you can just about see on the top with the reflection of the chain lol. Needed to be done though, also fitted the stickers that Bigs ever so kindly sent me.
Whilst I was at it, tidied up the SP-5 fork bottoms a little bit with a rattle can, will do for the time being till I can be arsed to powdercoat them. New stickers off Bigs too.
And now she sit like dissssss
Front disc brake conversion next week and hopefully a 2015 front number board.
Cordogs
Well-Known Member
That thing looks badass dude, nice job! :thumbup:
Adams
Well-Known Member
Thanks man, just can't wait to call it "done" now haha. Just waiting to pay for my Reeg disc insert, floating disc, formula brake and SP5 caliper bracket. Then I'll chuck the drum in the fast50's hub(China one doesn't fit) and get that mounted up too.
Dunno whether to go 10" front or not...
Dunno whether to go 10" front or not...
Adams
Well-Known Member
Quality Build mateWheres the riding pics!
Cheers dude, they'll be here soon enough.
This is where I am at with the build at the moment... I won't say too much but I got offered a frame/swingarm/shock setup I couldn't refuse and set up a deal for some new forks... I'll be back next week with details.
Adams
Well-Known Member
Can't wait to see what you do bud.
It won't be quite as special as some bikes here, but it involves a new front end, frame and rear end. And there's something new in that picture too that I'm in the process of tidying up and fitting new graphics to.
Adams
Well-Known Member
Meanwhile, whilst sorting the new chassis setup, I decided to sell the CHP as it was too big for my engine and go for a Pro Circuit T4. Polished it up and banged new stickers on it, stupidly put the end cap stickers on backwards but because they're foil stickers when I tried to take them off to correct it they ripped, no worries I'll just order another set eventually.
Just to keep you all waiting.
Just to keep you all waiting.
Adams
Well-Known Member
Adams
Well-Known Member
Won't be updating this build anymore, split it for parts and sold most of it, kept a few parts behind for the next build. Thanks.
Last edited by a moderator:
