chain

Hello, again! Sorry for a lot of threads but again new question! What chains do you guys use and what would be good? My Chinese chain is stretching out like crazy with my 155cc engine. I have taken look at DID420NZ3 and RK 420MXZ.

I need a set of RB chain adjusters for the pictured swingarm. Seller must be willing to ship to the UK.

Not going to cut and paste my whole thread as it's mostly the boring part of finding parts, but after collecting parts for a couple of months I've got myself an alright roller built up, just waiting to pick up a few parts, namely a motor that I've got lined up. As it stands at the moment...

Need some info on wat type of chain the o ring type or just the normal type the bike 00 yamaha 426f

So i picked up another bike the other day, It's a 138cc, allloy framed (faded anodised red), CRF50 style pitty, and seems to be a pretty solidly built bike. Came with Fastace AS02 forks, and I Shock rear? Alloy rims, Kenda Millsville front tyre, and a performance inner rotor kit (debatable)...

This bike was purchased by myself and a few mates during our stay up the coast for schoolies. I found it on gumtree before we went up the coast and inspected it upon arrival. In traditional schoolies fashion, the clutch cable was extremely loose, chain had stretched quite a bit, rear end was...

ITEM: 2009 Motovert RX125 with a z175 engine swap. Has QLD registration until 18/11/2015. Will not come with RWC. CONDITION: In reasonable condition, gets regular maintenance and services. The z175 is a bit rattly but that just seems to be how they are, sounds the same as the day I bought it...

Hey guys chasing a crf50 chain guide cover that goes over the chain on top of the swing frame so the little guy doesn't get his fingers or foot stuck in the chain. WANTED: Crf50 Chain guide cover - Standard Crf50 bars CONDITION: New/used around 2005 model PREFERRED PRICE RANGE: As cheap as...

I currently have a 2010 dpro 160 with the 155z engine (oval cam chain cover) and shes getting a bit smokey. Ive changed the rings with little or no improvement. Some have suggested valve stem seals which seems too hard for a rookie engine wizz like me so im thinking of buying a yx head (with...

I Have a dodgy intake valve tappet cover on my lifan 125 because I snaped one of the bolts ages ago and couldn't get it out, so I drilled in next to it and I drilled through into where the little adjuster rod and locknut are and metal shavings got in there :/ went for a strap cuz I got the cover...

Wanted: Original Chain Slider for Billetware/Sano style swingarm Condition: Preferably brand new, but a secondhand one in VG condition will be ok Preferred Price range: let me know Location: S.A. but am happy to pay for postage Extra Information: Will buy one from US if i need to. but just...

Hey guys the chain keep falling off my sons 110cc atomik. The sprockets are near new with no wear on them. I have tightened the chain with the tentioners and pulled the back wheel back. All to no avail. Is it time for a new chain? Sent from my GT-N7105T using Tapatalk

Hi I'm new here. New to riding motorbikes too....but defiantly not new to bikes just bikes with motors. I went and bought a TDR 125 ox7 from ebay. Pretty sure you know the one the 125cc TDR with a ducar motor. I did do my research and I was thinking this will be perfect A.its cheap and B.I...

:handshake:Just put together my new SSR-110semi pitbike and it seems great so far. Buttttttttt.....while doing a pre-delivery chain adjustment I noticed that while rotating the rear wheel the chain would go slack and then tight then slack again. I suspect a bad rear sprocket because it is in...

HI CREW I HAVE A 2009 ATOMIK 160cc BIGFOOT WITH A KMC#428 CHAIN, DOES ANYONE KNOW HOW MANY LINKS OR WHAT THE RK OR DID EQUIVALENT IS THANKS

i just went for a ride and i noticed that my back wheel seemed to be wobbley and the chain is more loose then last time i rode when i got back i tightend all the bolts but its still happening any ideas? thanks