Hello all, I have an Atomik 125cc Avenger that has a Ducar engine.
The stock CDI had a rather weird wiring harness for its connection to the CDI.
It had a 3 plug ( only 2 wires though ( Red + Black Stripe, and a Black + White Stripe)
And a 4 plug ( only 3 wires though ( Blue + White Stripe, Yellow + Black Stripe, and a Solid Black)
The Takegawa Hyper CDI had the following:
2 Plug ( 2 wires (Black with Red Stripe, Black with White Stripe)
4 Plug ( 3 wires (Blue with Yellow Stripe, Green with Black Stripe, Black with Yellow Stripe)
Now obviously here we can tell that the stock hardness with its 3 plug isnt going to fit onto the TakeGawa Hyper CDIs 2 plug socket.
And I also had the issue of the 4 plug from the stock harness not matching the 4 plug on the TakeGawa CDI socket.
So I went to the local hardware store and bought one of those 6 wire Sockets and Connectors made for Car looms.
I could easily match the 2 plug, Stock: Red+BlackStripe to Hyper:Black+RedStripe and the Stock: Black+WhiteStripe to Hyper: Black+WhiteStripe.
Now I was pretty confident with those matchings for the 2 plug. Heres where I ran into problems.
As you can tell from above, the colors of the Stocks 3 plug and the Hyper's 3 plug were different, only 1 wire had the same color's(Yellow+BlackStripe). However, I tried my best at matching them this is how I wired it:
Stock: ________________________TakeGawa:
Yellow+Black Stripe________________Green + Black Stripe
Blue+White Stripe _________________Blue+Yellow Stripe
Solid Black________________________Black + Yellow Stripe
After wiring it up this way, I decided to test the bike, and it started first kick and immediately I could here the higher rev's, the better throttle responce ect.
However there is one thing I would like to clear up with someone who knows what they are talking about. How I have it wired now works, IF I had one of the wires WRONG would the bike still run. In otherwords what im trying to say, if the bike runs, have I got it wired 100%. or could I possibly have something wrong.
I notice that there is a Yellow+Black Stripe and on the otherside a Black+Yellow Stripe that I thought perhaps should be connected, but I tried an it wouldnt start.
If someone could just clear up if its wired correctly that would be great.
Thanks heaps, regards Josh
The stock CDI had a rather weird wiring harness for its connection to the CDI.
It had a 3 plug ( only 2 wires though ( Red + Black Stripe, and a Black + White Stripe)
And a 4 plug ( only 3 wires though ( Blue + White Stripe, Yellow + Black Stripe, and a Solid Black)
The Takegawa Hyper CDI had the following:
2 Plug ( 2 wires (Black with Red Stripe, Black with White Stripe)
4 Plug ( 3 wires (Blue with Yellow Stripe, Green with Black Stripe, Black with Yellow Stripe)
Now obviously here we can tell that the stock hardness with its 3 plug isnt going to fit onto the TakeGawa Hyper CDIs 2 plug socket.
And I also had the issue of the 4 plug from the stock harness not matching the 4 plug on the TakeGawa CDI socket.
So I went to the local hardware store and bought one of those 6 wire Sockets and Connectors made for Car looms.
I could easily match the 2 plug, Stock: Red+BlackStripe to Hyper:Black+RedStripe and the Stock: Black+WhiteStripe to Hyper: Black+WhiteStripe.
Now I was pretty confident with those matchings for the 2 plug. Heres where I ran into problems.
As you can tell from above, the colors of the Stocks 3 plug and the Hyper's 3 plug were different, only 1 wire had the same color's(Yellow+BlackStripe). However, I tried my best at matching them this is how I wired it:
Stock: ________________________TakeGawa:
Yellow+Black Stripe________________Green + Black Stripe
Blue+White Stripe _________________Blue+Yellow Stripe
Solid Black________________________Black + Yellow Stripe
After wiring it up this way, I decided to test the bike, and it started first kick and immediately I could here the higher rev's, the better throttle responce ect.
However there is one thing I would like to clear up with someone who knows what they are talking about. How I have it wired now works, IF I had one of the wires WRONG would the bike still run. In otherwords what im trying to say, if the bike runs, have I got it wired 100%. or could I possibly have something wrong.
I notice that there is a Yellow+Black Stripe and on the otherside a Black+Yellow Stripe that I thought perhaps should be connected, but I tried an it wouldnt start.
If someone could just clear up if its wired correctly that would be great.
Thanks heaps, regards Josh
Last edited: