I reckon he means just the top plate that clamps the bars to the risers,a mate of mine got a set of AS02's last week and everything went on sweet until putting on top plate and found that it was about 10mm less side to side than where the risers were.So basicly you could put bolts in either left or right side but opposite side holes are about 5mm out of line.Either they are from a different model fork(and accidently mis-packaged) or someone stuffed up big time during machining and made 'em too small.I have heard of about 3-4 sets like that now????!!!
Brian at maylands where he got forks is onto it and it will be sorted.
A couple of options are to get the right top plate resupplied,slightly modify top crown and move risers in a bit,cut top plate(if your absolutely desperate to ride) through the middle(unfortunately straight through lovely fastace logo) and have individual clamps,or have new top plate/clamps machined up.
Goose is talking about my forks all bolts up but handlebar clamp {READ NOT TRIPLE CLAMP } this is 4mm out
you know the part that secures handlebars to the risers that top plate
THIS FORUM IS FOR GETTING THE RIGHT INFORMATION NOT READING BETWEEN THE LINES AND ASSUME SHE'LL BE RIGHT MATE.
ASSUME = ASS U ME