212ccmbx10
New Member
So I bought a new mini bike. Just something to get started that was cheap and able to be used for shenanigans.
It is a Motovox Mbx10 chassis with a predator 212cc engine. It is all stock besides the engine swap. Also, the seat was reupholstered, but the stock exhaust melted the bottom...
Frame has been repainted recently but got used shortly after.
SO bought it Thursday, then Friday I took it out with a buddy who then laid it out
Got it home today and started making sure everything was alright. Well long story short the clutch got bent and was rubbing. So i took that off and ran it to make sure it didn't warp or bend the crank and that looks fine.
So not even three days in and its almost completely torn apart.
Questions:
1) What parts to I need to get by to take the govener? I've seen its just an arc billet flywheel and rod but just want to be sure.
2) What cvt (torque converter) should it go with?
3) What sprocket sizing should I go with? I'm not looking for high speed just a moderate acceleration with slight speed. Saw a 54 tooth works well on the back.
4) Suspension... these obviously don't have suspension, they were cheap mini bikes.
ultimately
5) should I just scrap the whole thing and get a different chassis...
Thanks for the help,
212ccMbx10
It is a Motovox Mbx10 chassis with a predator 212cc engine. It is all stock besides the engine swap. Also, the seat was reupholstered, but the stock exhaust melted the bottom...
Frame has been repainted recently but got used shortly after.
SO bought it Thursday, then Friday I took it out with a buddy who then laid it out
Got it home today and started making sure everything was alright. Well long story short the clutch got bent and was rubbing. So i took that off and ran it to make sure it didn't warp or bend the crank and that looks fine.
So not even three days in and its almost completely torn apart.
Questions:
1) What parts to I need to get by to take the govener? I've seen its just an arc billet flywheel and rod but just want to be sure.
2) What cvt (torque converter) should it go with?
3) What sprocket sizing should I go with? I'm not looking for high speed just a moderate acceleration with slight speed. Saw a 54 tooth works well on the back.
4) Suspension... these obviously don't have suspension, they were cheap mini bikes.
ultimately
5) should I just scrap the whole thing and get a different chassis...
Thanks for the help,
212ccMbx10