Recent content by ricky_191

Hey guys, I have been looking every where for info on this bike and nothing yet. There was two ignitions sold with this bike and the one i was told worked and needed to be wired up is the wrong one. I have worked out that this bike would have had the keys missing and has since been stored for...

Hey all, Having some trouble with the steering. Now i think there is a few things wrong with the set up but it's stiff and hard to turn and also very twitchy. I'm thinking that the angel part on the hub is wrong and also that nothing is in line. The steering rods are too far forward on the...

Hi all. I brought a new project,a Honda today or nvs 50. It needs the ignition barrel wired up and a few things. It does turn over but no spark. Question is tho could I run pit bike wiring for it as I know way more about it and its cheap to buy and available. Any suggestions? Thanks guys

Hi all. Looking for some rear atv rims, 78mm centre to centre off a 250cc atv. Can post to 4810 as well. Thanks!

Hi all. I have a set of rims 4 stud and center to center is around 60mm. I have a 23 tooth spline axle off a 250 cc atv. Is it posible to get a hub that fots both? Thanks.

Second part of this build. I started by stripping the plastics off the four wheeler and trying to get it started. When i brought it they said "we have had it running before" which was a total lie as the wiring was so bad and the spark plug brand new aha. They had put on a new wiring harness...

Hi all. Not sure where to post this but mods can move if needed. This is my latest project that i have been working on for a few weeks. I'm building a GO KART!! It started as a way to learn new skills like welding and something to have fun with. I picked up half a go kart from a mate that is...

Sorry guys life has been hectic. I got the carbie and fitted it and wasn't even close to starting. So far I have an inner rotor kit,carbon reeds,de restricted exhaust and a top end rebuild (piston,cylinder and head. Also new spark plug. Normally run a 40-1 mix. I'm pretty sure it has...

Hi all. I'm trying to Finnish atleast one project so looking for a pw50 carb. I got a reproduction one and didn't work. After a genuine Yamaha carbie if I can get one,my bike is 89 I think. Will pay with PayPal and will also need to send to Townsville. Thanks in advanced.

Thanks so much for your help. I like the idea of a small bike that can be registered as there isn't many close places to ride around here. I want something cheap and I can adapt any frames extra and do everything else . Time for a real project aha Any help finding something like a frame or...

hi all. I'm close to finishing some projects laying around so I have space for a new one. Thinking of building a mini bike like hondaz50 or -ct70. questions tho. I have been looking around for answers and still nothing concrete. If I get say A honda-ct70 frame with vin number could I build it...

Hi all. I haven't really done much to this motorbike since last posting. I have taken it on a few rides, run the dogs with it and just ride it. I didn't ride it for a few months and then pulled it out a few weeks back and started it up with in a few kicks :) I have been riding a bit and took...

Hi all. I got a bit done today but so much more to go. I went hunting for parts and got most of what I need. I have a few spare carbies and I used two to make one good one. I cleaned it out and fitted it up. I also found out why the intake is glued on. Some one has snapped the bolt -_- it's...

I think it's all hooked up ok. I wired it with a new loom but one wire wasn't put into the cover and it was singled out and I missed it. But I traced it through the second bit of shielding and it was to the cdi and it's the one that goes to the coil. I can't even remember what I have done to...

Hi all. I have left this bike alone for a while. I got a project car so I could sell it and make some money. That took up a lot of time so with that all done and gone, I have some spare time and money. I have also been riding my other pit bike a bit and want a second one for my little bro to...