Search results

ok, yeah the pumer one is longer. I thought about that but decided I would ask up here first. I got on with the DHZ stuff but it looks way to short to use.

Yeah so will my local bike shop have a little shortcable to replace the one I f%$ked like the standard atomic cable??? i would only need the little short bit or have poeple been able to find a cable that fits in one peice??? thanks

love the manifold adaptor! I am having issues trying to work out how to get the standard throttle cable in my 26mm...... I counld not compress the spring enough to get enough cable through to set the end n the plastic slide! so i trimmed about 15-20mm off the cable sheeth and now i have it all...

cool thanks alot i'll go and see how i go now with it. thanks alot

Ok, so the air has to come out of the top of the resovior not the bleed nipple on the bottom. makes sense as air would rise in fluid. thanks guys. is nthere any other tips I need once the air is out. obviously as the air comes out there will need to be fluid added to the resovior??? thanks a heap

so how's the best way to bleed it now. leave the master cap on???? or off???? how will I know when it has bled them off as I had a clear line running off the bleed nipple and there was no bubbles in that at all

Hi, as you have read in the title. I was getting my missus to help me bleed the front brakes on my new pitpro 140 bigfoot to get rid of the standard factory crap and my missus wasn't watching and let the master cylinder run dry!!!! so then i contined to bleed them pumping holding the lever...

Hey mate i piked one of these up last friday and have put it all together onyl take it for a strap aorund the front yard so far but wha i have noticed is that the front brakes are appaling. were yours the same???

yeah i am wanting to know the same thing

Yeah, i know. problem is the money but i will see how i go with it still waiting on pics of it to se what kind of condition it's in.

yeah i was thinking that but i've put so much time and effort into the mikilon/blitz now already! was thinking of getting it anyway

Well finally getting around to putting my mikilon (now aka YZF ha ha) I have powdercoated the frame in a flat gloss black and got my mate to 2-pac and clear the swing arm and linkages in a very brite silver. went and replaced ever single bolt at the local bolt shop with hi-tensile plated boltes...

yeah i am also interested if anyone knows any places to ride between gold coast and byron bay area???? I am from tweed heads and always see utes and trailers with bikes on them every weekend and they seem to go froma couple of hours and then return again. so there must be a few laces close to...

cool, thanks so THUMP140 what i the rough seat height??? and does it have a similar seat to the blitz/mikilon??? as in the LINK 250 i bought for her is really tall in the rear and the seat is about 2.5inch's wide which makes it uncomfortable on our longer trailrides. mind you it has reall balls...

so did anyone find out if they are going to be listing anymore of these??? I am really really keen aswell. I think it would be a great bike for my wife as it is larger/longer and would be alot more stable than her atomik link 250cc which is an animal to ride and very very unpredictable.

oh ok then, sounds good, I suppose until the cops start showing up on there DRZ400's eh! ha ha anyway i will have to check it out when i get my bike back to gether in the net week or so.

so is it a privat quarry if the gates are locked??? or state forest quarry???? ever tlaked to the rangers that you see out there???

Great thread, I have made not alot of progress on minem engine is still on the work bench as the fram is back all powder coated ready to reasseble but have had no time to do it, carby is all here ready to go aswell. I think we have enough poeple with blitz/mikilon/bull's to start our own forum...

hey everyone my frame is now eing powder coated instead of 2-pac as we painted it and found out the hard way that it sracthes way to easy even with 6 coats of 2-pac clear! :-) anyway I have just bought a 26mm flatslide so that will begoing on the motor before i fit it back into the frame. So...

thanks mate, would be a great help. does your seat lift at the front at all when sitting on the bike??? when i removed my seat i saw that the bit in the seat where it slides onto the tank was cracked so it doesn't hold down properly. anyway good to get some ideas about what to do next. I...