ignition

Hey guys, I got here a 124cc pit bike engine. I got it with separated ignition coil. My problem is, that I don't know how to wire the ignition coil to the cables coming out of the engine. Can you help me? Thanks

Hey,I've put a stock flywheelback on my bike ( ifyouve read previous threads of mine.) to see if it was the lightened flywheel effing it up, but it's still not right.. Just cuts out at random times, mostly mid range to wot but it's not a dirty carb or main jet, pulled all that apart and it's...

hey guys, long time lurker first time poster, Ive got a pitpro 140 le, the ignition is breaking down in the top of the rev range, also wont sit on constant revs, have replaced ignition lead, cap whick was rusty from water ingress, could it be the stator?? Im a mechanic by trade and have tinkered...

Hello all, brand new here and just after some links/advice on parts to use on my ignition system. Ive ordered a brand spanker Atomik Reign 160cc bigfoot. Yet to show up. Im looking for performance upgrade options only... Whats a proven CDI to suit this bike? Decent quality performance coil...

Anyone have pics or any helpful info about motor mounts and/or electrical hookupo for this mod? I have a Lifan on its way and am preparing to remove my motor and modify the frame, fit it, and get her painted...any help would be appreciated...thanks...

Hi all. I got this second hand motor for my new project bike but the wiring looks strange to me. There is two sets of wires coming from the engine and I don't know what they do. I have looked around but can't find out exactly what they are and what they do and if I can just chop them out so...

Hey guys, So my chain flew off on my lifan 125 and snapped the pulse sensor off. So I bought a new stator plate. It seemed to be exactly the same except the sensor was a tiny bit closer to the flywheel and I had to grind about half a mil off the 'nib' of flywheel so it wouldn't hit when it...

Do they use irk, ork, or a regular stator? I ask this because I was on pitbikeclub's website and I asked this question. They said that I can put a 155cc stator on 125cc engine to give my bike better throttle response.

Can you replace a stock bike with a new stator and because of that new stator it has better throttle response/acceleration? Like are there "performance" stators and flywheels? and I dont mean and ORK or IRK.

ITEM AND CONDITION:BBR Rev Box CDI, fits 2003 - 2009 KLX/DRZ ONLY. New condition, thought it would work on a 2002 but it doesn't. PRICE, PAYMENT METHODS AND TERMS OF SALE:$50, this includes express postage. You can pay via paypal, bank transfer or cash if you pick it up. REASON FOR...

Hi guys New to the forum, have a problem with my genuine thumpstar engine, i recently replaced the stock magneto with one of those performance magnetos off ebay, but i cannot for the life of me get spark. ive replaced the coil, spark plug, and try every possible combination of wiring here...

Bought an aftermarket stator/flywheel and all on eBay (link below). Swapped it into my lifan 110cc no problem, accept for the wiring... Has anyone done such a swap? Do I need to buy a new harness all together? Does anyone have a diagram for this stator, or know what colors match up? I've always...

hi there just realised i have the wrong stator, what i want to do is run lights off my yx 160 but there is no 'yellow' wires only black with yellow and that goes to the coil So....i have the regulator and im wondering if i can hard wire the regulator to the coil? if not ive seen a magneto on dhz...

I recently bought the IRK kit off ebay that everyone has to try and freshin up my 70cc bike. I installed it on my chinese crf 70. The bike ran flawlessly before i put this kit on. I installed the components and ran it off my stock harness into my aftermarket rev box (didnt use the red one that...

hey guys, on my last three rides of been on i have had my chain come off go through the chain guard and into the stator snapping off the magnet first time we thought it was just because the chain was loose and came off, second time the chain tensioners where all buckled so the wheel just kept...

hi this is my first post here hope i'm in the right spot. I picked up a non running 88 ds80 for my daughter as she is out growing her 79 jr50. The previous owner said it lost spark one day and he had a friend look at it. he cut and spliced all the wires and it sat for 5 years. something seems...

Hi all,I have been on here ages ago asking probs with my engine,well 1 year later I'm still having it. To start with the motor didn't run right as it came with a Mollt carb,got a oko 26mm flat side and it still didn't run right,when I say didn't run right........basically spits fuel out of the...

Hey guys, My stator plate wires are different to my wires on my bike, (the colours) and i am kinda confused, can someone please tell me what goes to what? Much appreciated if you can! This is on the bike: This is my stator plate:

Hey everyone, I'm trying to get a stator/lighting coil for my 155z (should be the same as z160ho) to run a rev limiter. I have seen a few on ebay for around $30 (Brand Magneto Stator Coil 8POLES GY6 125 Moto Lighting | eBay), but I have no idea how to work out if they will fit or not? I know...

Hi all, I have a 160cc LE pit bite pro, I am upgrading the Magneto so I can run a front headlight, But am unsure what wires to connect where, it's different wiring then my friends 125cc pit bike, I'm unsure about the wires comming from the magneto, they are all joined into a big white...