suspension

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Best Pit Bike forks for value

    Hi wanting to buy some decent forks for my Atomik Reign Bigfoot 160cc What’s would people recommend that I could get in Melbourne for a reasonable price. Thanks in advance.
  2. D

    Linkage bushes... need help!!

    Have an older style linkage system with roller bearings looking at cheap options or other ideas for replacing the bike is a tdr ox I believe
  3. F

    Suspension options?

    Just got myself a crf70, has tb 88 kit with race head and cam and sure does rip. I'm very happy with the motor side of the bike but not so much the suspension, I've done a lot of research but can't find a clear answer to anything. I have a set of 730mm Gpx inverted forks but am not sure how t...
  4. 559fiddys

    upc xsi pro fork help

    Hey guys I need a little info if you have it. I need to rebuild my forks but I don't know what they are so therefore I don't know where to look for parts. Upc xsi pro is the bike they are on. Any info would be awesome thanks guys.
  5. LJasonH

    Suspension Setup Tips

    More tweaking to come... so does anyone have any suspension setup tips for an Outlaw 160 (the GPX and Black Label setup). Are the settings for sag, compression and rebound just as they are for a larger bike (I didn't find anything in my searches)?
  6. S

    What was the first bike in your family?

    So I thought I would go through some history with you guys cause. My story pretty much is I wasnt allowed to own motorbikes as a kid, now im old and crusty I can. My Grandpa on mums side bought one of these beasts in 1929 (took a year back then for the new models to make it here on a ship)....I...
  7. S

    Marzocchi front end

    ITEM AND CONDITION:Marzocchi shiver 35mm, also have KLX110 triple clamps or LXR triple clamps PRICE, PAYMENT METHODS AND TERMS OF SALE:Buyer pays postage costs. $500 for forks alone, $600 with KLX110 triple clamps and new tapered bearings, $550 with LXR triple clamps. OTHER INFO:Forks have 8...
  8. C

    Fastace shock service BFA01AR / BS35AR

    G'day, got all the new seals (Elstar Products - supplier of Petrol Motorbikes(pit Bikes) 50-125cc, ATVs (Quad bikes), dirt bikes and Fast Fifties, an agent for Apollo and Orion motorbikes. Elstar provides after-sale service and supplies high-quality after-market parts of the foll - only place I...
  9. the50king

    DHZ 125 shock/spring

    Hi Ive recently bought a dhz125 off there site. i weigh bout 80- 85kg and i reckon the back shocks a bit soft for my likings, i saw on there site they have a 1000lbs fastace spring on there but dont know wether its going to fit my GPX shock, anyone have any info?? thanks guys Heres a couple...
  10. R

    Suspension Upgrade

    I just bought the 2011 model 160cc Atomik Reign Bigfoot. I am going to replace to stock forks, shocks and handlebars too give it some extra strength. I am looking at Pro Taper bars and DNM suspension, but dont know exactly what to go for? Any suggestions? What other upgrades would you guys...
  11. Defective

    Suspension Basics - Setup and Troubleshooting guide

    I was reading a thread on here discussing linkage and non linkage suspension setups on both pit bikes and the 2011 KTM's so I clicked on a couple links to read more about it when I came across this suspension tuning and troubleshooting guide. It was written for/by WP suspension but the same...
  12. C

    Suspension upgrade

    HI CREW I AM ABOUT TO UPGRADE THE FRONT FORKS AND REAR SHOCK ON MY ATOMIK 160cc BIGFOOT SO I CAN START GETTING SOME AIR. I AM LOOKING AT DNM HRC REAR AND M-200 FRONT. JUST WANT TO KNOW HOW TO BE SURE I HAVE THE RIGHT MEASUREMENTS WHEN ORDERING. I THINK THE FRONT FORKS ARE 730mm MEASURING FROM...
  13. C

    Suspension upgrade

    HI CREW I HAVE AN ATOMIK 160cc BIGFOOT, I WEIGH ABOUT 85KG AND WILL BE JUMPING THE BIKE, WONDERING IF ANYONE HAS HAD ANY EXPERIENCE WITH FASTACE SUSPENSION UPGRADES, I WAS THINKING FRONT FORK 730mm AND A REAR SHOCK WITH 1000lb SPRING, OR SHOULD I GO DNM OR SOMETHING. IDEALLY I SHOULD BE...
  14. T

    DNM vs GPX forks

    Hi All Does anyone know much about the DNM hornet forks with a 48mm fork diameter? I found them on TBolt USA - Pit Bikes, Pitster Pro, SSR, G2 Moto, Honda 50 Engines also can anyone tell me if the DNM are better or worse than the GPX blacklabel fork from DHZ? Please email me at...
  15. gregmj

    110 quad rear shock

    Hi, first time posting so I hope I get this right. I'm looking for a new rear shock for my son's 110 quad. Length is 270mm with 10mm bolt holes. I have tried a Fastace 22 with a 550lb spring but this was way too hard. Does anyone have any ideas as to what spring rate I should be using and where...
Back
Top