Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    Bolt the magneto sits on has snapped

    I brought a second hand 125cc Bigfoot and the guy said it wasn't running because of something electrical so I tried to kick it over and it made this terrible noise so I took off the magneto cover, seemed fine then I tried to kick it over once more and the magneto fell straight off.
  2. S

    How is the timing set on DS80 - 1995

    Hi I am working on a 1995 DS80 for a buddy. Can anyone explain how the ignition timing is set on this bike? I see a small arrow on the crankcase, but is this supposed to correspond to a mark on the magneto plate? The magneto plate has slots and looks like it is rotated clockwise...
  3. my67xr

    Daytona / Lifan 150 Adjustable Outer Rotor Stator conversion to Z155Ho, Z160Ho etc

    i thought i'd make a thread for anyone wanting to convert their Ignition's to the Daytona / Lifan 150 Adjustable Outer Rotor set up on Zongshens etc this is the basic Outer Rotor kit to suit a Daytona 150 / 190 or Lifan 150 that you'll need to do the conversion. or you can buy the more...
  4. my67xr

    Testing your pit bikes' electrics, Stator Magneto, Source coil, Pulse coil, regulator / rectifier

    i thought i'd make up a thread with some pictures of a few common Stators and list the Ohms readings if anyone needs to check theirs. i'll add some other stators when i get a chance next, and some ignition coils too Lifan 125 type stator and flywheel. the black coil to the left is the Source...
  5. timeeh

    HELP!!! No spark... Daytona/Lifan 150 style Adjustable Outer Rotor

    I know it's been covered b4 but i have no idea what i'm supposed to be doing when it comes to multimeters :( Hopeing someone can help. I have so far elimiated the following Brand new plug Swap 3 different plug leads and heads Changed out the coil to the old standard one Unplugged and...
  6. G

    3 phase lighting coil rectfier needed.

    Well I hit a new 160z and it comes with a 3 phase coil I'm looking for a new rectfier for it as it didn't come with one. Any ideas?
  7. D

    125 atomik pro x?

    hey evryone im a newbie and was wondering if anyone had any tips for me i have a atomik 125 pro x (i think) and wile in nutral the revs rise to a sirtain point and hold there untill i take off....any idears? and was wondering about some mods to the ducar 125 its just not got enuf power also do...
  8. S

    FS Daytona stator with wiring and cdi

    ITEM AND CONDITION: Daytona stator with CDI and wiring loom (In good condition) PRICE: $200  REASON FOR SELLING: don't need the stator any more LOCATION: SE Melbourne contact number 0433953381
  9. pitsterprobrendan

    boyesen ignition cover

    howdy guys just looking for a boyesen ignition cover to fit my 160 pitsterpro any one got any links