wiring

20190822_134607 by Jake P posted Aug 22, 2019 at 2:25 PM20190822_135325 by Jake P posted Aug 22, 2019 at 2:25 PM20190822_135415 by Jake P posted Aug 22, 2019 at 2:25 PM20190822_135438 by Jake P posted Aug 22, 2019 at 2:25 PM20190822_135453 by Jake P posted Aug 22, 2019 at 2:25 PM20190822_135510...

never mind, fixed it.

Hello guys! I found a mini atv on the side of the road and decided to try to fix. It has a 2 stroke 49cc engine with electric start. However I'm having some trouble with the wiring which is really messed up. There's also an alarm system attached which I would like to remove. As my knowledge of...

In my younger years I had a ds80 given to me for free. Somehow over the years it found its way to the back of the barn. Now pulling it out and doing a full rebuild to find all the wiring torn up to the point I cut everything off. So form is there a plug and play cdi wire harness you can buy...

Hi Guys,:cool: I'm having problems with wiring my YX160 engine. It has five wires coming out of the flywheel , one (blue/white) ,(green), (black/red) and (two yellow wires). I am running a lifan 8 Pin CDI with four wires there are (yellow/red), (green/white), (black/red) and (pink)...

Ok so ive been building a postie bike for a little while now and i have installed a yx150 engine from a ciniworx 150. Install went well everything ran just fine, but the engine didnt have a charging/lighting circuit. So i bought what i thought was the appropriate magnito/stator off ebay. When i...

Well I'm getting down to the last of my wiring 5 pin cdi easy enough I know what all there pins do but my stator has the following White to reg Yellow to reg/feed lights Green Green / red trace Blue white trace = trigger wire to cdo Black What do the rest of the wires do go to one...

Hi guys, I recently replaced my pitster pro engine with a 125cc Lei engine and it all fits perfectly, problem im having is that i seriously have no idea how the wiring goes, i have old wiring from old engine and wiring from the new engine i got second hand...im seriously confused as hell, if...

I was thinking of putting lights on my son's Chinese pitty. The bike never came with them but the stator has the coils there for it- two yellow wires in this case. (it's a 6 pole stator). I've got a 5 pin regulator but no idea what the wiring is meant to be on it- I would love to use it- has...

i thought i'd make up a thread with some pictures of a few common Stators and list the Ohms readings if anyone needs to check theirs. i'll add some other stators when i get a chance next, and some ignition coils too Lifan 125 type stator and flywheel. the black coil to the left is the Source...

Anyone have pics or any helpful info about motor mounts and/or electrical hookupo for this mod? I have a Lifan on its way and am preparing to remove my motor and modify the frame, fit it, and get her painted...any help would be appreciated...thanks...

I recently purchased a used Apollo AGV-21 70cc mini bike for my 5 year old son... After looking at the VIN, I believe it's a 2008 model?? However, it's in poor shape. I'm trying to find a parts list and repair service manual for this mini. It needs quite a bit of work... Some of the parts...

Hi Tech Masters, After searching for quite some time, I've finally picked up a "49cc" registered Sachs Madass. This in itself excites me somewhat. Anyway, its got the 88cc BBR kit installed already, but I need a clutch and at least 125cc before I'm going to enjoy this bike. I'm looking at...

Hey guys, So my chain flew off on my lifan 125 and snapped the pulse sensor off. So I bought a new stator plate. It seemed to be exactly the same except the sensor was a tiny bit closer to the flywheel and I had to grind about half a mil off the 'nib' of flywheel so it wouldn't hit when it...

Do they use irk, ork, or a regular stator? I ask this because I was on pitbikeclub's website and I asked this question. They said that I can put a 155cc stator on 125cc engine to give my bike better throttle response.

Can you replace a stock bike with a new stator and because of that new stator it has better throttle response/acceleration? Like are there "performance" stators and flywheels? and I dont mean and ORK or IRK.

Hi guys New to the forum, have a problem with my genuine thumpstar engine, i recently replaced the stock magneto with one of those performance magnetos off ebay, but i cannot for the life of me get spark. ive replaced the coil, spark plug, and try every possible combination of wiring here...

Bought an aftermarket stator/flywheel and all on eBay (link below). Swapped it into my lifan 110cc no problem, accept for the wiring... Has anyone done such a swap? Do I need to buy a new harness all together? Does anyone have a diagram for this stator, or know what colors match up? I've always...

hi there just realised i have the wrong stator, what i want to do is run lights off my yx 160 but there is no 'yellow' wires only black with yellow and that goes to the coil So....i have the regulator and im wondering if i can hard wire the regulator to the coil? if not ive seen a magneto on dhz...

I recently bought the IRK kit off ebay that everyone has to try and freshin up my 70cc bike. I installed it on my chinese crf 70. The bike ran flawlessly before i put this kit on. I installed the components and ran it off my stock harness into my aftermarket rev box (didnt use the red one that...