Brendo's 88/150 motovert

Advertise with us
Find deals on amazon
Shop deals on ebay
Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Success, thread insert is in and all ready to go I'm now just waiting on the longer throttle cable and should be kicking it over by the end of the week.

u4u8atu8.jpg


On another note what base jetting are people running with an oko on a stock 150? I'm guessing just 36,100?


Sent from my iPhone using Tapatalk 2
 
Awesome news mate, yeah stick with 36/100 and see how she rips. Get that goto charged.;)
 
on my Lifan 150 and OKO 26mm,
with the standard #36 pilot jet, when i give it a blip rev, it'd hesitate a bit then rev.
i fitted a #38 to it, and the hesitation went, i might even try a #40 in it next time i ride it.
and thinking about it now, i reckon i have a bigger main jet in it too, a #107 iirc ?
i'll check for sure next time i'm up there.
 
my67xr said:
on my Lifan 150 and OKO 26mm,
with the standard #36 pilot jet, when i give it a blip rev, it'd hesitate a bit then rev.
i fitted a #38 to it, and the hesitation went, i might even try a #40 in it next time i ride it.
and thinking about it now, i reckon i have a bigger main jet in it too, a #107 iirc ?
i'll check for sure next time i'm up there.
Click to expand...

Cheers mate, I think I've got a 38 in the ever expanding bag off jets I have haha. I'm thinking ill have to go up straight away because of the size of the fmf pipe. Its always good to know what others have as a start.

Also the gopros always charged Mick ill defiantly get some footage for ya mate so you can see how it goes. I'm a bit off a useless bugger with editing so don't expect my vids to be like Wakey's.
I'm so keen to see how it rips with the 10 incher.


Sent from my iPhone using Tapatalk 2
 
Seat cover is made and on the way, thanks Gerro for putting me onto Mario from topline upholstery, his a top bloke.
Can't wait to fit it up.
y8utu9up.jpg



Sent from my iPhone using Tapatalk 2
 
Looks awesome, that was the style I was originally going to go for..
 
Have you had a ride yet Brendo?
 
rotn50 said:
Have you had a ride yet Brendo?
Click to expand...

Na lad I've been wait for some stuff to come and a new killswitch as I buggered mine up. Hoping by the end of this week to actually kick it over, I know I've been slack.


Sent from my iPhone using Tapatalk 2
 
Haha, all good mate just a lil anxious to see how it all goes and what you think of the bike.
 
Just got a package in the mail, ill post some pictures when they're on the bike.
ru7aqy7e.jpg



Sent from my iPhone using Tapatalk 2
 
Ok got the throttle cable and new 1/4 throttle today. Just finished throwing on a set of usd forks and gpx triple clamps which took some skillful modding with and angle grinder.
Pretty happy with how it's coming along, i may of over done it with the red tyres but they wont last long anyway so im hoping to try and kick it over tomorrow fingers crossed.
Will get some pictures for ya's.


Sent from my iPhone using Tapatalk 2
 
She lives I managed to kick it over this morning but me being a dumb ass hooked the oil lines up back to front and the crappy hose clamps are stripping when doing up to stop a couple of oil leaks so will sort that out and have another go.
But for now he's a couple of pictures, I'm still waiting for my lightspeed cover to be made and sent along with my fast50 shifter.
hysesa7e.jpg

va3aty5u.jpg

8y2aqynu.jpg



Sent from my iPhone using Tapatalk 2
 
it's looking very good now brendo,

here is an idea for you,
Speedflow make some cheap anodised ends for hoses, most car speed shops sell them.
like these-
http://www.ebay.com.au/itm/Speedflo..._Parts_Accessories&hash=item2c6885e203&_uhb=1
http://stores.ebay.com.au/Torques-U-K/AN-6-12-5mm-and-15-mm-/_i.html?_fsub=1060567012
http://www.ebay.com.au/itm/Aluminiu..._Parts_Accessories&hash=item2ebfca2f73&_uhb=1
or you could put some banjo fittings on the ends-
http://www.ebay.com.au/sch/i.html?_...sacat=0&_from=R40&_nkw=banjo+hose+ends&_arr=1



i like the Cobra clamps, being stainless they are easily polished, and they are only about $2-$4 each.
you need to know the diameter of the hose when it is clamped up though to order them.
i buy a few maybe 12mm,13mm, and a 14mm and try them on,
i see which clamps the hose the best, then order more of that size.

they clip together firmly with some pliers, and are use for high pressure fuel injection systems etc.
to undo them you put a small flat blade screwdriver in the gap where they join and twist it to pop them open.
they are reusable a lot of times.
Pirtek and Enzed sell them, some Repco's keep them too.

these are the ones i used for my PWR trans cooler hoses on my Ford Territory,

 
Damn dude, honestly the suspense is killing me, although I know the donk is good, but being the one who sold it to you I need to hear it rips mick, lol. Please get this sorted asap. Bahahaha, all good mae, and it looks awesome mate and the red tyres tie in just fine I reckon.
 
The seat looks awesome.. How did u go installing it??
 
my67xr said:
it's looking very good now brendo,

here is an idea for you,
Speedflow make some cheap anodised ends for hoses, most car speed shops sell them.
like these-
http://www.ebay.com.au/itm/Speedflo..._Parts_Accessories&hash=item2c6885e203&_uhb=1
http://stores.ebay.com.au/Torques-U-K/AN-6-12-5mm-and-15-mm-/_i.html?_fsub=1060567012
http://www.ebay.com.au/itm/Aluminiu..._Parts_Accessories&hash=item2ebfca2f73&_uhb=1
or you could put some banjo fittings on the ends-
http://www.ebay.com.au/sch/i.html?_...sacat=0&_from=R40&_nkw=banjo+hose+ends&_arr=1



i like the Cobra clamps, being stainless they are easily polished, and they are only about $2-$4 each.
you need to know the diameter of the hose when it is clamped up though to order them.
i buy a few maybe 12mm,13mm, and a 14mm and try them on,
i see which clamps the hose the best, then order more of that size.

they clip together firmly with some pliers, and are use for high pressure fuel injection systems etc.
to undo them you put a small flat blade screwdriver in the gap where they join and twist it to pop them open.
they are reusable a lot of times.
Pirtek and Enzed sell them, some Repco's keep them too.

these are the ones i used for my PWR trans cooler hoses on my Ford Territory,

Click to expand...

Thanks heaps mate I might try them cobra clamps out, trying to do it on the cheap thou so 8 clamps at $10 each is getting pricey.
Yeah mate the seat covers awesome, it fitted up perfect and is so grippy, how did your one go Gerro?



Sent from my iPhone using Tapatalk 2
 
You must log in or register to reply here.

Latest posts

Back
Top