ok the puller is on its way lol
Stator/Magneto Q ?
- Thread starter xLOCOx
- Start date
Help Support Mini Dirt Bikes & Pit Bikes Forum:
ok guys got the puller now tommorow ill take the flywheel off, so my67xr do i measure from the start of the threaded hole to the other or do i measure from the middle of the threaded hole or the end of the threaded hole?
that way i dont mess u around and it turns out the coil wont line up with hole
also do u want to know how deep the flywheel is?
that way i dont mess u around and it turns out the coil wont line up with hole
also do u want to know how deep the flywheel is?
Last edited:
my67xr
Miniriders Legend and Master Spanner Spinning Mode
ok,
did you get a measurement of the inside diameter of the flywheel yet?
here are the dimensions of the lighting coil i have.
check them against what you have.
the coil mounting holes are 58mm apart, centre of hole to centre of hole.
the depth of the flywheel needs to be around 35mm,
overall length of the coil is 75mm
did you get a measurement of the inside diameter of the flywheel yet?
here are the dimensions of the lighting coil i have.
check them against what you have.
the coil mounting holes are 58mm apart, centre of hole to centre of hole.
the depth of the flywheel needs to be around 35mm,
overall length of the coil is 75mm
cheers mate will get on to it tomorrow
ok got it done same numbers as u mate
my67xr
Miniriders Legend and Master Spanner Spinning Mode
ok, pm sent
i added an extra 5 bucks for your troubles
mounted the regulator just waitin for the coil
my67xr
Miniriders Legend and Master Spanner Spinning Mode
sorry mate, but the payment still hasn't gone into my acc ?
i'll call the bank tomorrow and see what's happening
my bank has recently moved, and something may have gone wrong at their end possibly ?
i'll call the bank tomorrow and see what's happening
my bank has recently moved, and something may have gone wrong at their end possibly ?
has it gone in yet?
my67xr
Miniriders Legend and Master Spanner Spinning Mode
nah it didnt go through, a bsb problem.
i'll pm you the details shortly.
stubsy, are you talking about the internal thread of the flywheel, for taking it off?
if so, it's 27mm x 1mm L/H thread.
there are some different ones too, so check before you buy one
i'll pm you the details shortly.
stubsy, are you talking about the internal thread of the flywheel, for taking it off?
if so, it's 27mm x 1mm L/H thread.
there are some different ones too, so check before you buy one
pm sent 
u wouldnt of sent it by any chance
u wouldnt of sent it by any chance
ok my67xr it turned up slaped her on and shes making some volts thanks again
my67xr
Miniriders Legend and Master Spanner Spinning Mode
very good,
have you had a multimeter on it to check the regulator etc is working?
what lights and switch are you running?
have you had a multimeter on it to check the regulator etc is working?
what lights and switch are you running?
yep 14-13 volts
ill have to come back to this thread in a while because dont have enough funds to get the lights ect.
thanks tho
ill have to come back to this thread in a while because dont have enough funds to get the lights ect.
thanks tho
my67xr
Miniriders Legend and Master Spanner Spinning Mode
are you setting it up for Rec Reg ?
yer mate sorry i haven't got'n back to you
my67xr
Miniriders Legend and Master Spanner Spinning Mode
that's ok, i saw you posted in the other thread too.
