The best bargain yet !! Z160HO PitPro !

[my67xr]

yeah worn rocker maybe?
but it's not the side to side movement that does it,
it's the adjusting screw putting too much pressure on the rocker arm against the camshaft lobes

i can get a new chrome/steel pipe for you for around $30

 

[stoozo]

yeah worn rocker maybe?
but it's not the side to side movement that does it,
it's the adjusting screw putting too much pressure on the rocker arm against the camshaft lobes

i can get a new chrome/steel pipe for you for around $30

Swap you the swinger from the bigwheel for it?

 

[DustyFork]

What a excellent deal mate it shows that if ya spend the time treasure hunting it pays off!

 

[stoozo]

What a excellent deal mate it shows that if ya spend the time treasure hunting it pays off!

Cheers mate I was a bit over zealous to begin with! There are plenty of bargains out there....especially on facebook!

Sent from my WT19i using Tapatalk

 

[stoozo]

Right well work got canned due to the rain. So I better do something constructive while Trials Fusion downloads.

I think the lack of copper washer in the exhaust was where the smoke was coming from! Here are the pipes crf at the top and the one from the z160ho on the bottom! The z160ho pipe is certainly in bad shape!



Nice flow though!




I also found/noticed the engine bracket has been welded up!! Hmmmm...should have a spare off the bigwheel pit pro...should be the same size score! :thumbup: