DustyFork
Well-Known Member
I just put a head back on my engine after I have reseated the valves and put in new piston and rings after a quick hone of the bore. Put it all back together and I have 0 compression. There is no leaks through new head gasket and head bolts are tight. So what is it? My thoughts are on the little lug on the roller on the camshaft is letting air out.dont know what it is call ed and only seen them on 2 china cams I've played with. Is it some sort of decomp? It spins one way and locks up when you spin it the other. I fixed an old china dunga by removingthis off a cam as it was causing the engine to hunt when idling and would not rev. Once I removed it off the cam and put it back in engine ran perfect. Is this my problem?