What did the postie bring you...?
Help Support Mini Dirt Bikes & Pit Bikes Forum:
my67xr
Miniriders Legend and Master Spanner Spinning Mode
The postie dropped off a small package of nuts to me today.
5x M5 x .8mm pitch Titanium at a cost of $15 inc delivery
and a month or so ago i received my Digital Optical Tacho (i forgot to upload pics)
cost $11 inc delivery
5x M5 x .8mm pitch Titanium at a cost of $15 inc delivery
and a month or so ago i received my Digital Optical Tacho (i forgot to upload pics)
cost $11 inc delivery
GooseMan
Well-Known Member
titanium nuts? that must be for the xr falcon?
my67xr
Miniriders Legend and Master Spanner Spinning Mode
There's not many metric bolts/nuts on that !
They are rocker nuts for a pit bike engine, it was cheaper buying 5 than just 2
They are rocker nuts for a pit bike engine, it was cheaper buying 5 than just 2
gottagetacheaperhobby
Moderator
my67xr
Miniriders Legend and Master Spanner Spinning Mode
Nice !
Is that sprocket Alloy or steel ?
Is that sprocket Alloy or steel ?
gottagetacheaperhobby
Moderator
not sure, just one of the 15 dollar dhz sprockets do im guessing steel. I needed the 39 to help the poor gpx 125 out, it struggled with the 36, even with a 14 tooth front. Coil is for my bike when I get her 
got my new valves and they look rather smicko!!!
and they look rather smicko!!!
another tool for the trade!!! lol not that I'm pursuing it! lol
so got the teng tools 5-25nm torque wrench its 1/4" drive and seems be well made
'
very happy with my purchase!!!
lol not that I'm pursuing it! lolso got the teng tools 5-25nm torque wrench its 1/4" drive and seems be well made
very happy with my purchase!!!
my67xr
Miniriders Legend and Master Spanner Spinning Mode
The postie dropped some jets off to me this morning.
Now i'm sure the perfect jetting/tuning combination is here for me! somewhere.... :laughing-smiley-002
and i got a spare fuel tap too.
Now i'm sure the perfect jetting/tuning combination is here for me! somewhere.... :laughing-smiley-002
and i got a spare fuel tap too.
Asdfghjkl
Member
ooracing cdi for those mad limiter bashing jumps
gottagetacheaperhobby
Moderator
Coil and kill switch to finish callums bike off, just waiting on the peg mount from dhz
LEO DPRO 037
Well-Known Member
gottagetacheaperhobby
Moderator
No probs mate glad they showed up quickly.
LEO DPRO 037
Well-Known Member
Your packaging was second to none. Top job.....!
LEO DPRO 037
Well-Known Member
Got something to hopefully prevent me having to do the fork seals in the black labels. Thanks for the idea craig...!
Pen is just for size comparison.
Called a seal mate $13 off ebay. Looks like a cheap bit of flat plastic with some advertising printed onto it. Meant to scrape between the seals to remove debris.
Pen is just for size comparison.
Called a seal mate $13 off ebay. Looks like a cheap bit of flat plastic with some advertising printed onto it. Meant to scrape between the seals to remove debris.
Attachments
gottagetacheaperhobby
Moderator
Nice! Hopefully it works for you, if not the last set of forks I got done cost me around 60 bucks from memory. Still a cheap set of quality forks
LEO DPRO 037
Well-Known Member
It looks like its worked. Took around 10 minuites to do both. Guess I wont really know till I ride with em. Still need an axle and a brake mount..
my67xr
Miniriders Legend and Master Spanner Spinning Mode
Did it dig much out ?
The people i've heard that use them say it can take a few goes to get the majority of dirt out.
pump the front end up and down over a few bumps and check for any oil leakage on the chrome fork stanchion
I can do the caliper mount for you,
it'll take about an hour to modify and reweld it, if you want to bring the bike down one day.
The people i've heard that use them say it can take a few goes to get the majority of dirt out.
pump the front end up and down over a few bumps and check for any oil leakage on the chrome fork stanchion
I can do the caliper mount for you,
it'll take about an hour to modify and reweld it, if you want to bring the bike down one day.
