Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    What plastics will fit

    Hi all Just wondering what plastics will fit a 2007 moto vert 125 as the plastics i have now are perishing so im looking at getting more plastics but unsure of what will fit first time owning one have always owned the bigger bikes If you could help be much appreciated picture of the pocket...
  2. A

    Motovert RX Engine swap

    Hi everyone, I have a 2008 Motovert RX 125 with the original Jialing and it’s on it’s last legs soo it’s swap time.. I am looking at doing maybe the ZS 190 or something similar, but have a few questions before going ahead. What are the requirements to do the transplant, any cutting, fab work...
  3. tormentandglory


  4. J

    Motovert Rx headstem bearings (Help needed Please)

    Hey, Currently working on a Motovert rx125. I need to replace the tapered roller bearings in the head stem and cannot find where to buy any that will fit. The OD is 41mm and ID is 22mm for the top and 24mm for the bottom. The only bearings i could find with a 41mm OD were for a crf50 but...
  5. Z

    Motovert RX155 Minimotard

    My Motovert RX125 with 155z motor. Registered with the motor and capacity listed. Old member Android90's old bike. OKO 26mm 36/102 top clip, air screw 1.5 turns, port matched. 17/37 gearing. Pitster Pro X4 swingarm (looking for a new one if anyone has a link to buy one other than the one from...
  6. L

    Motovert RX Chain Guard for Rego

    Hi Guys! I have a Motovert RX and I just wanted to know how you guys got passed rego with/without the chain guard? I was a lucky person and got audited when I went for the identity check so there are now a few things that need to be fixed. Mine doesn't have one on there (besides the bottom fin)...
  7. J

    Sump plug threaded

    Hi, I don't have much info on the bike I have, all I know is it's a Motovert 140, seems to have a Lifan engine. A friend of mine once took it to a shop for a service, and this so called "mechanic" has completely threaded the oil drain hole (apparently not the first time he has gone all trigger...
  8. J

    Motovert RX build

    hey guys, I have recently acquired a 08 motovert RX. It began life as a 50cc, but the previous owner put the 110cc lifan into it. The whole bike has 740ks but the 110 was put in less that 100 ago. When I got the bike the whole engine was really loose so I needed to find some bolts and It...
  9. A

    Wanted Pitsterpro, Motovert or YCF pit bike, QLD

    Chasing a pisterpro, motovert or YCF 150-160 for a suprise for hubby anyone know any deals going atm
  10. spoonta68

    People with motovert rx125 or 50...roll call

    hey peoples just picked up a motovert rx as a little street killer project wanting to find out if there is still members who own and ride the mvrx ill post some pics of mine tommoz
  11. noypi160cc

    rear shock for motovert Type r 2012

    Hi guys what shock are compatible with my bike?
  12. S

    Motovert 133cc engine swap for crf50 engine

    Hey guys I just brought a crf50 that has a Motovert 133cc engine. I brought he bike for my nearly 3 year old nephew. I don't want this engine in it and wondering if anyone would want to swap for a stock crf50 engine?
  13. S

    Which bike can you jump?

    Hi guys! So my brother and I want to get a 125cc pitbike each, we plan to jump them and want bikes that will last! We previously bought atomiks off eBay for about $800, we both snapped our bars and I popes my front forks out, not to mention every bolt coming loose etc. they both died within a...
  14. Sv666

    Wtb Keihin PE26 or PE28 carby for a Daytona 150 2valve (t-Rex)

    Hey guys WANTED: Keihin pe26 or 28 To suit a daytona 150 trex. CONDITION: As new preferred but as long as it's in running order. PREFERED PRICE RANGE: $145 max!! as they are $185 new! LOCATION: Bateau bay 2261 central coast near gosford etc.. EXTRA INFORMATION: Recently bought a nice...
  15. xistn

    Motovert RX 125 issues

    hey guys, so i picked up a motovert RX for road use (mainly for trolling my friends) unfortunately the previous owner had the batter in the wrong way round (blew the fuse) i replaced but seems the charging system isn't working, ie go for a ride and 15mins or so the lights are pretty dull...
  16. M

    Motovert RX125 (Melbourne)

    Hi guys, had my fun with this little beast and now its time to pursue other interests (e-bikes). I have a thread which outlines the mods performed but will list again. Goes great and turns heads everywhere it goes!! 2008 Motovert RX125 with 216kms put on my me with the speedo connected and...
  17. McDo

    Few Questions

    Hey MiniRiders, since i'm new to pit bikes, i'd just like to ask a few questions; Which bikes are Chinese? Which bikes are Japanese? Where are PitsterPro's and DHZ's made? Obviously, just the popular brands (don't need to tell what you they are) Any help would be appreciated, thanks...
  18. timeeh

    FOTM May/Jun 2014

    FIFTY OF THE MONTH May/Jun 2014 So Let's Get It Underway! Vote Now For Your Favorite FOTM For May/Jun 2014 Miniriders Admin and Mod Team Wish The Best Of Luck To All The Entrants <div style="background:rgb(20,20,20);min-height: 300px;width: 760px;padding: 10px;text-align...
  19. H

    help with motovert rx125 plastics

    I have a motovert rx125, I know that the crf50 plastics fit it besides you need a crf70 rear fender.. to save the hasssle buying both do all the crf70 plastics fit the rx125 or just the rear fender...?
  20. G

    3 phase lighting coil rectfier needed.

    Well I hit a new 160z and it comes with a 3 phase coil I'm looking for a new rectfier for it as it didn't come with one. Any ideas?