Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. UrbanRockWell

    Just got a Postie! 1981 Honda Ct110 Lifan 124cm

    Thanks all and anyone in advance for helping in anyway get some joy from this 1981 ct110 with a Lifan 125 engine I don’t know much about, YET! , and it’s not starting, I hear compression coming out the carbs and it seems super clean, it WAS missing flywheel flange hex nut, SO FLYWHEEL COULDNT...
  2. B7871ACD-B582-4D46-96B1-5E02BA172157.jpeg


    Drawn wire diagram of my 1981 Honda ct110 , Lifan 124cm
  3. Kprugger03

    Crf50 with lifan 125 questions

    I just bought a lifan 125cc motor got it all installed but am haveing a few prob 1 there is an extra blue wire coming from the cdi box I don't know what it goes too need help?? And 2 there are two pairs of wires each haveing a black with white strip and a green n both were do they go I think...
  4. B

    Z160Ho lighting and battery charging?

    Hi all! I've been doing some engine swapping lately on my rx50 (used to have a yx150 with a 125cc stator/flywheel and now it is a tiny bit dead...) and now I have managed to fit a z160ho inside that crammed little frame. It has the outer rotor kit (as all of them do) but there are no charging...
  5. B

    Key Igntion tutorial (not electric start)

    Hello, i have always wanted a key switch on my pit bike not only for security but it also looks more of a professional bike with the key (people say that it wont do jack to stop people joyriding or stealing saying someone would just unplug it and off they go i see it this way if they are dumb...
  6. F

    How should I wire up the Ignition Coil ?

    Hey guys, I got here a 124cc pit bike engine. I got it with separated ignition coil. My problem is, that I don't know how to wire the ignition coil to the cables coming out of the engine. Can you help me? Thanks
  7. B

    Making a new wiring loom / harness

    Ok so I want to get rid of the original loom it looks absolute **** house Questions: What size wiring do I need Where do you guys buy the different colour wire from Where can I source the pins for the plugs or new plugs with pins I have every thing ells Plenty info around on what pins...
  8. G

    8 pin cdi to 6 pin stator.

    Trying too wire up my bike I have a zongchen 8 pin cdi (7 wires used) and Trying to go to a 6 pin stator. So far I know On stator. Yellow wire to reg (power lights) White wire to reg. green/red netural light I think. So I've got a green (earth?) Blue/white Black/red That I have...
  9. B

    Determining engine

    Hi I have gotten a 150 from a friend that's not running and alot of parts missing I'm not sure how to tell what engine it is exactly though so I can source any parts needed Any info on what to look for where would be great I can post up pics a little later just not right now I have been...
  10. allyboyz

    GPX-125 or Z160ho rec reg?

    hi guys, Is it possible to wire up a rec reg kit to either of these engines ?
  11. my67xr

    Testing your pit bikes' electrics, Stator Magneto, Source coil, Pulse coil, regulator / rectifier

    i thought i'd make up a thread with some pictures of a few common Stators and list the Ohms readings if anyone needs to check theirs. i'll add some other stators when i get a chance next, and some ignition coils too Lifan 125 type stator and flywheel. the black coil to the left is the Source...
  12. P

    How To: Add Lights/Charging to GPX 150/160

    So after much troubleshooting and deliberation today, Myself and Wha77 worked out how to add a charging circuit to the stock GPX stator. It was such a mission but i'm glad we got there in the end. The thread is here if you feel like a massive...
  13. KLR125

    can i wire up a tacho?

    hi just wondering is it possible to wire up a tacho gauge to a 125 kick start bike all my bike has is the coil and cdi no battery please let me know if anyone has done it or if you know how to thanks allot chris:)
  14. P

    Help Wiring my pit bike

    I have a 5 wire stator and cant figure out how to wire it. Wire colors are: Black w/red stripe, blue w/white stripe, green, yellow, white. Ive read the other post on here but thats only for a two wire stator. Please help.