Search results

Just got a new wheel and i cant even move the bearings with my finger they are that stiff. Do they have to wear in or what? I was going to replace them before i installed the wheel but cant seem to get them out. Any ideas on how to remove the stock bearings and replace in the back wheel?

noticed on my bike today that if i grab the wheel i can move it sideways and the movement is coming from the bearing area. The bearings arent wrecked its like the wheel isnt done up tight enough to hold the bearings in place or the part which holds the bearings in place has expanded allowing it...

I got offered a 138cc lifan with oil cooler and lines for $500+$40 shipping brand new. Do you think this is a good deal?

My friend has a crf150, and i got a lifan 125, which do you think would win a drag race? And what bikes has your mini won in a drag against?

I have decided on getting a big bore kit, a 138cc kit+ which requires me to bore the head. Also will be getting a performance cam, and some heavy duty clutch springs. I'm not sure how much these mods cost but i'm pretty sure it will all add up to under $300. So heres my list so far: - 138cc+...

Who can wheelie their mini and keep it going? I find it easy to get up and can keep going for a bit till i run out of revs in 2nd. 3rd is the same but is a bit harder to get up. If anyone has any vids of wheelies post em up so we can all see how good your wheelying skills are!

I am going to get a new rear shock soon because my standard shock isn't a very smooth ride. I think all the bushes have gone in it already because when i raise the back end and let it down theres alot of play in it that shouldnt be there and i can see the shock moving in the mounts and they are...

Well looks like mso have some more competition. http://cgi.ebay.com.au/Dirt-Bike-125cc-PitPro-Thumpstar-CRF50-Pit-Bike_W0QQitemZ130013533062QQihZ003QQcategoryZ29705QQrdZ1QQcmdZViewItem The bike is almost identicle apart from the 14" front wheel, stickers and an all up gearbox! Looks like it...

What other sprockets fit these motors? I am lookin for a bigger front sprocket which fits and wondered if an xr, ct or ag sprocket will fit? or any other sprockets that are compatible with this motor?

I have removed all the stickers off my mso bike apart from tank stickers. But now i have all sticky shit on every guard that wont come off. I have tried removing it with the pressure washer, metho, turps and some other tar remover stuff and nothing has worked. its tough stuff. any ideas?

When i got my bike i only hit neutral sometimes when shifting 1st to 2nd. But now it does it from 2nd to 3rd and drops out of gear in 1st 2nd and 3rd. Is there a fix for this? I've heard about modifying the shift star. Or could it be because at the moment i'm running 15w-50 oil because thats...

I have a problem with my bike every ride the chain comes loose and starts to hit the swingarm making a rattling noise which is really annoying. I have to tighten it before every ride and every 30 min of riding or less. Is this just the chain stretching? cause if it is it stretches alot.

What cable can be used to replace the old clutch cable? Can an xr cable be used or something? I just broke my clutch cable and can get a new one from the honda or yamaha local dealers.

Are these genuine mikuni carbs? i checked the mikuni site and read a manual on tuning these carbs and my carb doesnt have the air/fuel screw like on the real mikuni. Does this mean my carb is a fake? and how can i tune it? The carb has mikuni written on it

Where can i buy stuff for my lifan motor online? I am referring to High compression pistons, racing cams, big bore kits etc. Prefer Australian sites due to shipping prices from overseas.

Had my MSO up beside a 400cc bike with speedo the other day and it pulled 78km/h along a gravel road. I have the standard sprockets which are 14t front and 37t back. (not too sure about front sprocket size, correct me if im wrong).

Was ridin my mso bike today and went over a little jump and when i hit the ground the back wheel locked up and chain come off and jammed up in the swingarm. I inspected the back wheel and a piece of the hub had broken off which houses the bearing case in the back wheel which caused the back...

Are all the mounts the same for the lifan, loncin, gpx, ducar, jialing, zongshen etc.. motors? If i wanted to change motors in my bike when i get it will they all fit? And also what if i bent the frame and wanted to upgrade to a twin spar bbr style frame from just the cheap steel china bike...

I am looking for a bike to import from china which has the big valve lifan 125cc motor. Can someone tell me which is the best bike from this link? http://www.alibaba.com/trade/search?Type=SALE%2CAGENT%2CMISC&SearchText=lifan+125cc&IndexArea=offer_en I don't want people to tell me that...